Telegram
Вконтакте
Дзен
Youtube
RutubeFloor and wall-mounted jib crane
Fill out the questionnaire
Submit a request for calculation
Description×
Our company designs and manufactures special jib cranes used to solve a wider range of tasks or in non-standard conditions. The floor and wall-mounted jib crane is attached simultaneously to the building wall and to the floor, which allows you to increase the level of stability of the crane and operate it with a console length of up to 12.0 meters. The rotation of the console is limited to an angle of 180°. The load capacity of this type of crane directly depends on the load-bearing capacity of the walls. The foor and wall-mounted jib crane can be manufactured by our company with both manual and electric drive for turning the console.
Specifications×
Capacity, t.up to 3.2
Boom outreach, m.up to 12.0
Angle of rotationup to 180 dg.
Drive typemanual / electric
Design number of full load cycles according to ISO 4301/1A2 and above
Environmental class according to GOST 15150-69U1 (outdoors) / U2 (under a canopy) / U3 (indoors) / U4 (under the canopy)
The design of the craneGeneral-purpose industrial version / Fire-safe version / Explosion-proof version
List of additional options×
By default, cranes are manufactured as standard. But depending on their technical characteristics and operating conditions, the plant manager may recommend supplementing the standard equipment with one or another set of options. Below is a brief description of them and the validity of the installation.
| Name of the option | Description of the option |
| Load capacity limiter | It is used as an additional safety device along with limit switches and a load drop protection device in case of phase breakage. It is installed, as a rule, in cases where work is carried out with different loads, the mass of which is not always known. If the weight of the load exceeds the lifting capacity of the hoist, the limiter blocks the lifting process. The option is available for cranes equipped with an electric hoist, since the limiter is mounted on the lifting mechanism of the hoist. |
| Sound and light alarms | The alarm is activated when the jib crane is turned on, warning employees to leave the danger zone. Depending on the conditions of the working area, it is recommended to install a light or sound alarm. The option is available only for electric jib cranes. |
| Radio control | Allows you to control the crane from a distance using the remote control. The option is available for electric jib cranes or for cranes equipped with an electric hoist. The package includes a 6-button remote control with an emergency stop button, a radio signal receiver (installed on the hoist or on the crane control box or next to the control box). |
| Electric motor with boom turn brake | The built-in brake allows you to stop the crane boom in the right place of non-stop movement of the equipment by inertia. It is impossible to manually fix the console at a strictly necessary point. Visually, the brake on the crane structure is not visible, since it is an element of the gearbox motor design. The option is recommended to be installed for cranes with the placement category U1 and U2 to prevent spontaneous movement of the boom in the parking position with wind gusts and other external factors. |
| Carport for parking hoists when performing "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| A canopy for a hoist for the entire length of the span when performed "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| Power off on the crane column | Allows you to turn on/off the tap power. It is located at a height of about 1500 mm from the lower flange of the crane. It is a two-button post in a protective (metal) casing. |
| Electric limit switches for the movement of hoists along the crane boom | They are used to limit the path of the electric hoist along the crane console. |
| Anchor system for fixing the crane to the foundation | This option refers to the stage of installation of the structure. Anchors are needed to attach the crane to the foundation. As a rule, we offer an anchor system for implementation on a prepared foundation. On an unprepared foundation, so-called mounting studs are used. |
| Load drop protection device in case of phase breakage | An additional safety device along with a load capacity limiter and limit switches. |
| Logger of crane operation parameters | Registers the operating conditions of the crane, including modes, duration and volume of loading. It is installed only when the crane is equipped with an electric rope hoist. |
| Crane operating time indicator | Controls the operating time of the crane, allowing time to carry out the necessary maintenance, maintenance and overhaul. It is built either into the door of the crane control box, or inside it. |
| Frequency control of the boom rotation speed | The frequency converter is installed in the crane control box for the possibility of adjusting the boom rotation speed in a certain range. It can also perform smooth start and braking. |
| Engine cooling system | It is recommended to use when installing a frequency converter, which will significantly limit the standard speed of movement of the crane, to prevent overheating of electric motors. |
| Input throttle | Smoothes the front and reduces the amplitude of the emission of bursts of alternating power supply voltage. Reduces the amplitude of the ripple current consumed by the frequency converter from the mains. |
| Platform and ladder for maintenance of hoists and crane components | When ordering a jib crane with a height of more than 3 meters, it is recommended to immediately provide ways of servicing the hoist, oil change and other maintenance operations. One of the options is to install a horizontal platform on the column at a human-height distance from the console and a ladder welded to the crane column leading to this platform. |
| Heated crane control box | Allows you to operate a jib crane at air temperatures up to -20 g. C (inclusive). It is required to be installed on all cranes that are operated at an air temperature below -10 g. s. Requires additional installation of a frequency converter. |
One of the leaders in crane construction, 1000+ cranes per year×
The “Gruzopodem” company is a modern factory in Kazan with an area of 17,000 m², where more than 1,000 overhead, cantilever, and gantry cranes, as well as other equipment, are manufactured annually. The factory is equipped with its own certified laboratories for destructive and non‑destructive testing, which, among other things, guarantees the high quality of products at every production stage: from incoming material inspection to the release of the finished product. We strictly comply with industry standards and have a Certificate of Welding Technology Certification issued by the National Welding Control Agency. Based on the results of an independent study, our company was included in the TOP‑5 largest crane manufacturers in Russia and was recognized as the best exporter in the Republic of Tatarstan in the industrial sector. In 2025 and 2026, the overhead cranes produced by our company became laureates of the republican competition “Best Goods and Services of the Republic of Tatarstan” in the “Products for Industrial and Technical Use” category, and also received diplomas at the federal stage of the “100 Best Products of Russia” program.*
*More details about the company’s diplomas, awards, and the results of independent studies:
https://грузоподъем.рф/awards.
Services
We provide a full cycle of work
Профессиональная консультация и подбор комплектации
Разработка проекта или проектирование по чертежам клиента
Производство оборудования в согласованные сроки
Промежуточная приемка оборудования на заводе (при необходимости)
Доставка оборудования
Монтаж/шеф-монтаж и пуско-наладка
Инструктаж персонала
Гарантийное и сервисное обслуживание
Certificates
Documents for carrying out activities
Floor and wall-mounted jib crane, design and operation features
- It is used for lifting and moving any cargo weighing up to 3.2 tons
- It is mounted on a concrete foundation by means of a support flange and anchor bolts. This type of crane has an additional attachment to the wall or column of the building to avoid the possibility of overturning
- The mechanism for lifting and moving the load is a hoist (tal), which moves along the boom of the crane
- For electric cranes, the current supply is carried out by default using an electric cable, it is possible to order optionally in the delivery package (if there is an electric drive for turning the boom)
- Control of the electric crane is carried out by means of a cable remote control with an emergency stop button or manually. It is possible to install a radio control option for remote operation with an electric crane. Turning the boom of hand cranes is carried out by means of a drawbar
- Lifting and lowering of the load is carried out manually or with the help of an electric mobile hoist and a control panel
- The advantage of special jib cranes over overhead cranes is the convenience of working in a limited working area, ease of installation, no need to provide crane tracks.
If you want to buy a floor and wall-mounted jib crane, get advice on its functional differences and specify the complete set-call the sales offices of LLC "Gruzopodyem" at the phone numbers listed on the website.
The plant "Gruzopodyem" has all the permits for the equipment produced. In addition to the production of the crane itself, the structural divisions of the enterprise carry out the delivery and installation of equipment at the Customer's facility.
What our clients say about us