Telegram
Вконтакте
Дзен
Youtube
RutubeWall jib crane double-arm and with the manual slewing
Wall jib crane double-arm and with the manual slewing with a manual drive for turning the boom is designed for mechanization of lifting and moving various loads. The equipment can be used indoors and outdoors at temperatures from -20 °C to +40 °C and -40 °C on request.
The double-arm boom design allows you to increase the working area and perform specific operations, such as moving cargo through doorways and over obstacles, as well as lifting loads in hard-to-reach places. The main part of the boom has a rotation angle of up to 180 °, and the auxiliary - up to 270 °.
Our company produces Wall jib crane double-arm and with the manual slewing according to TU-31 5920-006-87879481-2023 with a lifting capacity of up to 0.5 tons and a boom reach of up to 4.0 meters. The hoist in this type of crane can only be used stationary (not mobile).
| Name of the option | Description of the option |
| Load capacity limiter | It is used as an additional safety device along with limit switches and a load drop protection device in case of phase breakage. It is installed, as a rule, in cases where work is carried out with different loads, the mass of which is not always known. If the weight of the load exceeds the lifting capacity of the hoist, the limiter blocks the lifting process. The option is available for cranes equipped with an electric hoist, since the limiter is mounted on the lifting mechanism of the hoist. |
| Carport for parking hoists when performing "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| A canopy for a hoist for the entire length of the span when performed "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| Platform and ladder for maintenance of hoists and crane components | When ordering a jib crane with a height of more than 3 meters, it is recommended to immediately provide ways of servicing the hoist, oil change and other maintenance operations. One of the options is to install a horizontal platform on the column at a human-height distance from the console and a ladder welded to the crane column leading to this platform. |
| Rigid removable/non-removable stops for limiting the angle of rotation of the boom | Rigid removable /non-removable stops for limiting the angle of rotation of the boom are used mainly for jib cranes KKR3 and KKM7 to adjust the angle of rotation of the console. They are installed on the ring that wraps around the crane column. Two rigid stops limit the angle of rotation of the boom in both directions. On wall-travelling cranes, the stops are welded to the crane boom and can provide only 1 option for the angle of rotation of the boom. |
The “Gruzopodem” company is a modern factory in Kazan with an area of 17,000 m², where more than 1,000 overhead, cantilever, and gantry cranes, as well as other equipment, are manufactured annually. The factory is equipped with its own certified laboratories for destructive and non‑destructive testing, which, among other things, guarantees the high quality of products at every production stage: from incoming material inspection to the release of the finished product. We strictly comply with industry standards and have a Certificate of Welding Technology Certification issued by the National Welding Control Agency. Based on the results of an independent study, our company was included in the TOP‑5 largest crane manufacturers in Russia and was recognized as the best exporter in the Republic of Tatarstan in the industrial sector. In 2025 and 2026, the overhead cranes produced by our company became laureates of the republican competition “Best Goods and Services of the Republic of Tatarstan” in the “Products for Industrial and Technical Use” category, and also received diplomas at the federal stage of the “100 Best Products of Russia” program.*
*More details about the company’s diplomas, awards, and the results of independent studies:
https://грузоподъем.рф/awards.
What our clients say about us